Chenjie CHJ-86A2 intelligent security convenient wireless remote control switch
Publish time 2017-05-20 16:11
product name: 86 box 2 remote control switch model: CHJ-86A2 Product Summary: Can directly replace the traditional wall switch, do not have to transform the line, installation, wiring and the current mechanical switch exactly the same. Hand control, remote control at the same time, to retain the existing mechanical switch all the habits of the family, factories, warehouses, offices and other places the best control switch to lift the inconvenience and trouble of traditional switch lights, safe and convenient; Switch, does not produce spark, combustible gas is particularly safe to use. product description Learning type single fire line remote control switch series Instructions for use: ~ Do not connect FireWire and Neutral Line to this product at the same time! ~ Do not live with this product! ~ Do not install in a humid environment! ~ Do not exceed the load! First, the installation: non-charged operation! 1, cut off the power, the remote control wall switch as shown above, the line of fire and light into the switch box inside the terminal, and tighten the fixing screw. 2, connected to power. 3, press the panel button in turn, test whether the lights are lit and closed. Second, the remote control of learning: Please refer to the instructions step by step operation. 1, first press the remote control switch the first key, the road lights lit, and then press and hold the button again (lights off) about three seconds, until the light from the light to the light after the release of the key, the lamp is still Bright state, then in 5 seconds to press your choice of remote control and key number, if the lights off, that learning success. Operation flow: press the manual key ... light on ... release ... and then press the 3 seconds hold ... the light from the off to the light ... let go ... press the remote control key ... light off ... successful. 2, the second and third of the learning process ibid. 3, learning the code OK remote control can be switch control, not learning the remote control code can not be controlled. 4, clear the already good remote control. Press any key on the panel, do not let go in the light condition, about 8 seconds, the light from the light turned off, you can clear all the learning good remote control, clear, the remote control can no longer remote control the Switch, need to follow the above again to learn before remote control. Note: When the switch is used for the first time, it is best to clear the code left in the process of testing the product. 6, with full open, fully closed function: This function only fight on the 12 key remote control. For the learning of the 12 key remote control automatically default 11 key - "full open", 12 key - "closed". Third, the technical indicators: 1, rated voltage: 100-250VAC; 5060HZ. 2, rated load: resistance: 600W; sensibility: 200W; 3, remote control distance: high-power remote control is greater than 1005 meters, small power remote control is greater than 30 meters. 4, the receiving sensitivity: -95db. 5, receiving frequency: 315MHz. 6, standby current: about 50uA. 7, standby power consumption: 0.01W. 8, for a variety of lamps, starters and lanterns have a small part of the use of counterfeit Philips brand starter Please note that if you can not work, please replace the other starter can be. Fourth, the product description: 1, Model: CHJ-8601A (single), CHJ-8602A (2), CHJ-8603A (3); 2, specifications: 86 GB, direct installation. Or directly replace the original wall switch. 3, shell: PC flame retardant plastic, polished surface, eyebrow chrome plated metallic luster, big rocker touch button. Do not allow live wiring operation! Do not access the product at the same time!
