Chenjie CHJ-220V1DX energy-saving lamps windows and other high-power
Publish time 2017-05-20 16:11
product name:
220V1 high power learning remote control switch
model:
86-220v1Dx
product description
220-volt single-channel high-power learning remote control switch
First, the characteristics of an overview
Shenzhen Chen Jie Electronics Co., Ltd. design and manufacture of multi-function all the way wireless intelligent receiver controller, mainly used in lamps, electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields.
The wireless receiver controller, with high confidentiality, stable performance, low power consumption characteristics, and easy to use, without the use of traditional jumper or DIP switch coding, just the remote control of the wireless signal sent to the receiving controller Receive and store, you can achieve supporting use. The controller can learn 16 remote control. Its output mode, respectively, there are three self-locking, jog, interlock.
Second, the technical parameters
Operating frequency: 315 / 433MHz
Working voltage: AC220V
Receiver sensitivity: -100dB
Maximum load: 30A
Size: 42X55X16mm
Third, learning methods
Press and hold the learning key for three seconds indicator light, release the learning key while pressing the remote control specified button, the indicator light flashes after a few seconds that learning success. If the selected remote control is not correct or no valid signal is received 10 seconds after the program automatically withdraw from the learning state.
Learning is divided into three steps:
1, first clear the controller itself all the data (hold the learning button for about 8 seconds)
2, to determine what kind of work they need to use the 2262 chip remote control corresponding to the work of the way to write.
At this time can be based on the remote control chip 2262 output pin to define the working state (10 feet / 11 feet interlock / 12 feet lock)
3, according to the above learning method plus other remote control.
4, if you need to change the way you must first clear the information stored inside the controller and then re-learn.
Fourth, the removal method
Press and hold the learning key for about 5 seconds to indicate that the clear is cleared