Multi - functional learning 12 - volt 15 - way learning remote control switch
One, fifteen wireless intelligent receiver controller for the 15 relay output switch signal, the equipment to be controlled to achieve the motor is positive and negative; or switch on and off conversion and a variety of special control procedures. Mainly used in electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields.
The wireless receiver controller, with high confidentiality, large storage capacity, stable performance, low power consumption characteristics, and easy to use, without the use of traditional jumper or DIP switch coding, just the remote control of the wireless signal The receiving controller to receive and store, you can achieve supporting the use. If the learning remote control is lost during use, simply clear the information stored in the receiving controller, the lost remote control will not be able to remote control the receiving controller, to re-obtain the right to use, Re-learn once before use. Its output mode, respectively, there are three self-locking, non-lock, interlock.
Second, clear the saved information
Press and hold the module to learn the button for about 10 seconds to the buzzer, indicating that the stored information has been successfully cleared.
Third, the main technical indicators
1, the working voltage: 12V
2, static operating current: ≤ 6mA
3, the working temperature: -40 ℃ - +80 ℃
4, the receiving sensitivity: ≥ 105dBm
5, the operating frequency: 315MHz, 433MHz
6, the output voltage: AC, DC optional
7, the output current: ≤ 10A
Method of operation
1. On the code: hold the learning button, learning indicator light. Press the remote control any key, the indicator light three times that the success of the code
2,. Output status setting: a When S1 S2 is off, the output is jogged
B When S1 is shorted S2 is disconnected, the output is self-locking
C When S2 is shorted, S1 is disconnected and output is interlocked
D When S1 S2 is shorted, the output is invalid