Remote control switch multi-function learning type CHJ-C11X
Publish time 2017-06-02 17:18
Model: CHJ-C11X
All the way to learn remote control switch CHJ-C11X a drag 12 switches Name: Multifunctional learning all the way to 220V single remote control switch Description: Working voltage: AC220V Operating frequency: 315MHz / 433MHZ Maximum load: 1000W Work: Jogging, interlocking, self-locking (multi-function learning remote control switch, jogging, interlocking, self-locking can be through the receiver on the way of learning the choice of solder joints, work options to facilitate the load capacity. Coding type: multi-function learning code (EV1527 / PT2262 / PT2260 / PT2240 can learn) Features: The remote control switch can learn 20 different code remote control Remote control oscillation resistance can be used on the market remote control Loadable high power appliances Can be matching shell, shell 2 yuan a. 220V single learning remote control switch controller manual I. Overview: The company designed and manufactured multi-function all the way wireless intelligent remote control switch for a relay output switch signal, can control the equipment or motor to switch or pass, off conversion and a variety of special control procedures. Mainly used in electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields. The wireless receiver controller, with high confidentiality, stable performance, low power consumption characteristics, and easy to use, without the use of traditional jumper or DIP switch coding, just the remote control of the wireless signal sent to the receiving controller Receive and store, you can achieve supporting use. The controller factory default is only one remote control can be controlled, if the study of a good remote control in the course of the loss, just use the same type of remote control to re-learn to cancel the original remote control and access to the use of the current right. Its output mode, respectively, there are three self-locking, jog, interlock. Second, the output mode (special reminder: switch the way you need to disconnect the power to work) A, the signal from the lock - will 1,2 short circuit to take short B, the signal is not locked - will be 3 to short with short circuit C, signal interlock - short circuit to leave vacant, not short Third, learning methods Press and hold the learning key for three seconds, the red light flashes to enter the learning state, press the remote control any key to launch the signal, the light flashes twice to light off that learning success. ★ The controller with fixed code 2262 remote control when used, the oscillation resistance is not limited, but 4.7M best. Fourth, the technical parameters 1, the working voltage: AC220V 2, the working current: ≤ 6mA 3, the working temperature: -40 ℃ - +80 ℃ 4, the receiving frequency: 315MHz 5, the receiving sensitivity: -105Db 6, the output current: ≤ 10A 7, size: 54 * 31 * 18mmmm
