Chenjie CHJ-86-220V3DJ wireless remote control switch motor windows
Publish time 2017-05-20 16:08
product name: 220v simple motor controller
model: 86-220v3dj Product Summary:
Shenzhen Chenjie Electronics Co., Ltd. design and manufacture of all-in-one wireless intelligent remote control switch for a relay output switch signal, can control the equipment or motor to switch or pass, break conversion and a variety of special control procedures The Mainly used in electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields product description
220v learning tubular motor positive and negative control panel function: A: Line access 220v3 motor is reversing This product is directly used voltage AC-220V (± 10%), Please follow the map to connect a good line and then power! The The (Right figure for the top parts of the location map) The following are the functional descriptions of each wiring location: L for the input power line; N is the input power supply zero line; N is the motor's public line, connected with the zero line in the same line; M + terminal is connected to the motor forward terminal; M-number terminal connected to the motor reverse side; Kcom terminal for the manual switch common; K + terminals are forward switch manual switch terminals; K-terminal for reversing manual switch terminals; MO + output switch signal (normally open) MO-output switch signal (normally open) Two: clear
1), according to the above connected to the line and determine the output mode, you need to learn the code, in order to use the remote control for the correct control. 2), please follow the steps below to step by step. 3), in the control panel has a S1 touch switch, this button is used to learn the code and clear the use. 4), clear: before learning the code, you need to clear the operation. The specific operation is: press S1 do not put, see the LED point light, do not let go, until you see the LED flashing, it OK. The clean operation is complete.
Three: learning on the code 1), press S1, see the LED lit after the release of S1, this time has entered the learning state, within five seconds by pressing the remote control of any button to see the LED flashing 3 times after the extinguished. Learning finished. After learning, the remote control can be controlled.
Four: remote control and manual control 1), press the arrow on the remote control, the motor is turning. If the motor is reversing, the motor will stop and then turn. 2), press the remote control down arrow, the motor reverses. If the motor is running forward, the motor will stop and then reverse. 3), press the remote control stop button, the motor whether it is forward or reverse, will stop. 4), according to manual control is forward, the motor is running, manual control keys need to use the jog type, that is, press the release, release that stop. 5), according to manual override, the motor reverses. Manual control keys need to use the jog type, that is, press the release, let go to stop.
