简体中文 English

Intelligent control system first brand

Global 100 enterprises designated suppliers

Welcome to Shenzhen Chenjie Electron Co., Ltd. official website!

Service Hotline

+86-755-26518500

辰杰电子Chenjie Electron

Hot Keywords:  High power remote control, Wireless Controller, Wireless receiver module

Search
Product Categories
Home >> 86 type wireless remote control switch >> Chenjie CHJ-12V3 Road learning remote control switch lifting equipment
Chenjie CHJ-12V3 Road learning remote control switch lifting equipment
    Publish time 2017-05-20 16:11    
Chenjie CHJ-12V3 Road learning remote control switch lifting equipment
  • Original Image
     
    product name:
    12v3 road learning remote control switch
    model:
    86-12v3xx
    Product Summary:
    Shenzhen Chen Jie Electronics Co., Ltd. design and manufacture of multi-function wireless remote control switch for the relay output switch signal, can control the equipment or motor to switch or pass, off conversion and a variety of special control procedures. Mainly used in electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields. The wireless remote control switch performance is stable, low power consumption characteristics, and easy to use only the remote control of the wireless signal sent to the receiving controller to receive and store, you can achieve supporting the use. If you learn a good remote control in the course of the loss, just use the same type of remote control to re-learn to cancel the original remote control and access to the right to use the right now. Its output mode, respectively, there are three self-locking, jog, interlock.
     
    product description
    12V 3 way learning code remote control switch instructions
    one. Instructions:
    1, learning methods: press the S1 button on the receiver for about 3 seconds, and so the green LED lit after the release of the button to enter the learning state;
    2, press the need to use the remote control on the A key, see the receiver on the green LED lights flash off after a few times;
    3, learning is completed, the remote control can operate on it;
    Note:
    A, the signal from the lock - will 1,2 short circuit to take short
    B, the signal is not locked - will be 3 to short with short circuit
    C, signal interlock - short circuit to leave vacant, not short

    two. Function Description:
    1, press the A key on the remote control, the receiver board 4,5 terminal off, 5,6 terminal connected;
    2, press the B button on the remote control, the receiver board 7,8 terminal disconnected, 8,9 terminals connected;
    3, press the C key on the remote control, the receiving board on the 1,2 terminal disconnected, 2,3 terminals connected;
    The output of the receiver is self-locking;
        Users need to use a number of remote control to control the receiver, just a number of remote control code can be compiled into the same. In the study of the code, only one of them on the code, then the same remote control can control the receiver.
    three. Character on the receiver Meaning:
     
    S1: Learn the button on the code. Press the button for about three seconds, will enter the learning state. Convenient supporting remote control;
    Green LED: Indicator when entering learning state;
    Red LED: power indicator light;
    GND: negative input terminal;
    + V: power positive input;
    Label 1: the first way of the normally closed output, corresponding to the remote control of the C key;
    Label 2: the first way of the public output, corresponding to the remote control of the C key;
    Label 3: the first way of the normally open output, corresponding to the remote control of the C key;
    Label 4: the second way of the normally closed output, corresponding to the remote control of the A key;
    Label 5: the second road of the public output, corresponding to the remote control of the A key;
    Label 6: the second way of the normally open output, corresponding to the remote control of the A key;
    Label 7: the third side of the normally closed output, corresponding to the remote control of the B key;
    Label 8: the third side of the public output, corresponding to the remote control of the B key;
    Label 9: the third side of the normally open output, corresponding to the remote control of the B key;