product name:
12v4 road learning remote control switch
model:
86-12v4xx
Product Summary:
The wireless receiver controller, with high confidentiality, stable performance, low power consumption characteristics, and easy to use, just the remote control of the wireless signal sent to the receiving controller to receive and store, you can achieve supporting the use. The controller can learn up to 16 different encoding remote control at the same time, if the learning of the remote control is lost in the process, just use the same type of remote control to re-learn to cancel the original remote control and control now The right to use. Its output mode, respectively, there are three self-locking, jog, interlock.
 
product description
12v learning 4-way control panel Function:
        The wireless receiver controller, with high confidentiality, stable performance, low power consumption characteristics, and easy to use, just the remote control of the wireless signal sent to the receiving controller to receive and store, you can achieve supporting the use. The controller can learn up to 16 different encoding remote control at the same time, if the learning of the remote control is lost in the process, just use the same type of remote control to re-learn to cancel the original remote control and control now The right to use. Its output mode, respectively, there are three self-locking, jog, interlock.
One: line access
This product is directly used voltage DC-12V (± 10%), please connect the line after the operation of the first, the second step and then power! The The
The following is a description of each wiring location:
GND is the input power supply negative;
+ V is the input power positive;
No. 1 terminal for the first group of relay output normally closed;
2 terminal for the first group of relay output common;
Terminal 3 is the first group of relay output normally open;
No. 4 terminal for the second group of relay output normally closed;
Terminal 5 is the common output of the second group of relays;
Terminal 6 is the second group of relay output normally open;
7 terminal for the third group relay output normally closed;
8 terminals for the third group of relay output common;
No. 9 terminal for the third group of relay output normally open;
Terminal 10 for the fourth group of relay output normally closed;
11 terminal for the fourth group of relay output common;
Terminal 12 is the fourth group of relay output normally open;
S1 for learning and clearing buttons;
JP2 is set for output status;
Second, set the output mode
    Because this product is multi-functional type, before you use, please set their work according to their needs.
1), when JP2 jumper cap into the 3,4 position, set the output mode for the instant (jog); action: press the remote control button, the relay to pull, release the remote control button, the relay release.
2), when JP2 jumper cap into the 1,2 position, set the output mode for the steady state (self-locking); action: press the remote control button, the corresponding group of relays, and then click the remote control Button, the corresponding set of relay disconnect;
3), when JP2 jumper cap is not inserted, set the output mode for the interlock; action: press the remote control A button, the first group of relay pull, press the remote control B button, the second group of relays Pull, the first group of relays off, 4 sets of relays are interlocking state.
Three: clear
1), according to the above connected to the line and determine the output mode, you need to learn the code, in order to use the remote control for the correct control.
2), please follow the steps below to step by step.
3), in the control panel has a S1 touch switch, this button is used to learn the code and clear the use.
4), clear: before learning the code, you need to clear the operation. The specific operation is: press S1 do not put, see the LED point light, do not let go, until you see the LED flashing, it OK. The clean operation is complete.
Four: learning to the code
1), press S1, see the LED lit after the release of S1, this time has entered the learning state, within five seconds by pressing the remote control of a button to see the LED flashing 3 times after the extinguished. Learning finished. After learning, the remote control can be controlled.
Five: Note
1), this product is a multi-functional type, wide use, due to more features, the operation need to step by step. Moreover, you can repeatedly clear and learn.
2), the controller with load relay 7A, please use within the load range.
3), set the output mode of the product, the need to set before the power. Change jumper position of JP2 after power-on is invalid.
4), please contact us if you need other functions.