product name:
220V4 learning remote control switch
model:
86-220v4xx
Product Summary:
Shenzhen Chenjie Electronics Co., Ltd. design and manufacture of multi-functional wireless intelligent receiver controller, mainly used in lighting, electric doors, windows, lifting equipment, gate, lifts, industrial control and security industries and other fields. The wireless receiver controller, with high confidentiality, stable performance, low power consumption characteristics, and easy to use, without the use of traditional jumper or DIP switch coding, just the remote control of the wireless signal sent to the receiving controller Receive and store, you can achieve supporting use. The controller can learn 16 remote control. Its output mode, respectively, there are three self-locking, jog, interlock.

product description
YKT-220 four-way mini-learning control panel function:
One: line access
    This product directly use 220V AC, must pay attention to personal safety! According to figure a good line and then power! The The
(Bottom view)
1,1 input terminal access zero line;
2, 2 input access fire line;
3, 3, then the fourth road output line;
4, 4, then the first three output lines;
5, 5, then the second output line;
6, 6, then the first one output line;
7, the board relay output for the live output. Remote control connected, will output 220V FireWire.
Second, the output way to explain
1), set the output mode as: instant (jog); action: press the remote control button, the relay to pull, release the remote control button, the relay release.
2), set the output mode: steady state (self-locking); action: press the remote control button, the corresponding group of relay pull, then click the remote control button, the corresponding set of relay disconnect;
3), set the output mode as: interlock! Specifically: press the remote control A button, the first group of relay pull, press the remote control B button, the second group of relays, the first group of relays off, four groups of relay is interlocking state.
Three: clear
1), according to the above connected to the line and determine the output mode, you need to learn the code, in order to use the remote control for the correct control.
2), please follow the steps below to step by step.
3), in the control panel has a S1 touch switch, this button is used to learn the code and clear the use.
4), clear: before learning the code, you need to clear the operation. The specific operation is: press S1 do not put, see the LED point light, do not let go, until you see the LED flashing, it OK. The clean operation is complete.
Four: by learning different remote control keys to determine their own needs of the output (action)
1), press S1, see the LED lit after the release of S1, this time has entered the learning state, within five seconds press the remote control of a button, (different remote control button can get different output Mode, specify the output mode of the remote control can be EV1527 or PT2262) to see the LED flashes three times after the extinguished. Learning finished.
2), repeat the above (1) action once, the remote control code stored in the product.
3), if you want to change the different output mode, repeat the steps (1), (2).
Five: Note
1), this product is a multi-functional type, wide use, due to more features, the operation need to step by step. Moreover, you can repeatedly clear the study.
2), must pay attention to safety, then a good line after power, the board with a strong power! The The After power can not touch the metal parts on the board, the operation (except for remote control), the human body to ensure good isolation with the ground! Moreover, the input must have a leakage protection switch can be used.
3), need to hand to stabilize the controller, you can hand in the relay part of the plastic.
4), the controller with load relay for the 8A, please use within the load range.
Wish you to use this product happy!