简体中文 English

Intelligent control system first brand

Global 100 enterprises designated suppliers

Welcome to Shenzhen Chenjie Electron Co., Ltd. official website!

Service Hotline

+86-755-26518500

辰杰电子Chenjie Electron

Hot Keywords:  High power remote control, Wireless Controller, Wireless receiver module

Search
Product Categories
Home >> Telephone alarm series >> GSM-SD alarm CHJ-6260 video alarm
GSM-SD alarm CHJ-6260 video alarm
    Publish time 2017-05-20 16:18    
GSM-SD alarm CHJ-6260 video alarm
GSM-SD mobile phone MMS alarm alarm machine is suitable for villas, residential, shops, corporate finance, factory floor, small and medium supermarkets, car theft, hospital schools, financial institutions, unattended positions and other important parts of the burglar alarm, Camera, wireless transmission, MMS reception.
First, how to understand the basic functions of the host
1, supporting waterproof night vision 300,000 digital camera, for a variety of occasions to use.
2, aluminum alloy shell, durable.
3, built-in lithium battery, AC and DC, automatic charging.
4, support SD card storage pictures, easy to save evidence.
5, support image motion detection camera function.
6, support wireless remote control, to achieve arming, disarm or emergency alarm and take pictures, user-friendly use.
7, support the configuration of a variety of wireless anti-theft detectors, infrared on the radio fence, smoke, gas, emergency button.
8, the host has two wired input control terminal, easy to charge and connect a variety of wired alarm equipment.
9, the host has an alarm when the relay relay output, easy to linkage power, lighting and so on.
10, the host has a relay control output, the user can remotely control the air conditioning switch, rice cooker and so on.
11, the host has an external speaker interface, mute / siren alarm conversion.
12, configured 256Mb SD card, can store about 4000 photos.
13, the maximum can be inserted 2G SD card, can store about 28800 photos.
14, the host can be set up 5 groups of different alarm telephone number and room number information, to the remote owner, community security alarm.
15, the host can be 110 alarm center alarm center, map display.
16, the alarm when the scene automatically monitor the function, can clearly hear the scene of the voice, people walking, digging, pry and other action sounds.
17, the user to use the phone or mobile phone into the host, through the keyboard to achieve remote control remote control arm, disarm and so on.
18, the user using the phone or mobile phone into the host, through the keyboard to achieve remote control remote monitoring, camera and so on.
19, password operation to ensure system security.
20, using the tri-band GSM 900MHz, 1800MHz, 1900MHz wireless network, outbound alarm from the wired telephone network restrictions.
21, support GSM / CDMA mobile phone to receive the host of the Chinese / English short message alarm. Move the alarm and arm and disarm.
22, support GSM / CDMA mobile phone to send text messages to the host, to achieve remote control host arm, disarm and so on.
23, support GSM / CDMA mobile phone to send text messages to the host, remote monitoring remote monitoring, taking pictures and so on.
24, the host immediately after the alarm sent to the scene to set the color of the mobile phone users, allowing users to quickly watch the scene.
25, the host immediately after the alarm to send the scene color images to the user to set the two Email mailbox.
26, after the alarm through the INTERNET network to send color images to the network computer management center.
27, the user can send text messages to the host, take the initiative to capture the scene color images sent to the user on the phone.
28, the user can call the host, take the initiative to capture the scene color images sent to the user's mobile phone.
29, support Unicom CDMA color e mobile phone users to receive mobile MMS function, truly mobile Unicom.
30, wireless transmission image size adjustable: QCIF (160 × 128), CIF (320 × 240), VGA (640 × 480).
31, the whole wireless system, no wiring construction, easy installation. Applicable to garage, warehouse and other wired network less than the occasion.
 
Second, how to identify the host behind the pin function
1, the power outlet, then 12V / 1.5A DC power supply, the core cathode shell negative.
2, MIC hole, monitor the hole.
3, 10-pin connection port: ANT; Vd; GND; SPEAKER; RELAYa1; RELAYa2; RELAYb1; RELAYb2; L2; L1;
The first foot is the remote control antenna lead-out, the first two feet is the power Vd lead-out; the third pin is the ground lead; the first four feet is the external speaker output, audio alarm sound output, direct connection passive speaker, speaker another One end of the ground; 5 feet, 6 feet is the internal relay leads, usually feet off, the alarm when connected to 3 minutes, can be linked to power, lighting and other work; used in the car can automatically turn off the throttle. 7 feet, 8 feet is the internal relay terminal, usually two feet off, the user can remote control, control air conditioning switch, rice cooker, etc .; 9 feet L1, 10 feet L2 is a wired input, each port to ground Short circuit can trigger alarm.
4, CAMERA for the camera connection (with VD, Tx, Rx, GND)
5, reset the health (RESET), press and hold the reset button (RESET) and then plug in the power, 3 seconds later heard beep or orange light to red light, and then red light to orange light, the system back to the initial state, Password is 123456, the host memory of all detectors empty.
6, LED indicator, green light is always on, the host into the disarmed state. If the green light slow flash, the host is armed. If the red light flashes, the host is in alarm state.
7, SD card socket, you can insert the following memory card 2G.
8, SIM card seat, press the tip of the pressure by the SIM card seat side of the small yellow point, eject the deck, remove the deck after the GSM card folder, and then pressed into.
9, Antenna ANT, plug in the power before, first connected to the antenna.
10, power switch, to turn off the power supply.
 
 
Third, how to open the host
1, buy a new SIM card, or the old SIM card on the phone and the SIM card on the phone book and SMS all deleted, and then put the SIM card into the host behind the SIM card, connected to the GSM antenna.
2, the camera is connected to the socket CAMERA.
1, if the SD card, you can insert the SD deck.
3, then the DC power (12V / 1.5A) into the host, open the switch, the host LED orange light is always bright, GSM module boot, host orange light slow flash, began looking for GSM network and detection SIM card. Host orange light flash, detection camera. 20 seconds after the green light is always on, the host self-test success, the host automatically into the disarmed state. If the host green light slow flash, it is in arming state. If the host red light flashes, then in the alarm state, the host red light slow flash, send text messages; host red light, send MMS.
 
Fourth, how to set the host to call out the phone number (5 groups) and the host to send text messages (5)
1, the user can send a text message to the host to call out the phone number and send the message content settings, SMS format such as:
Password # opcode #.
Such as a short message 123456 # 51 # 15915341555 #, said the first phone number.
Such as a short message 123456 # 52 # 13169923777 #, said the second phone number.
Such as a short message 123456 # 53 # 13325193766 #, said the first three phone numbers.
Such as a short message 123456 # 54 # 13456789123 #, said the first four phone number.
Such as a short message 123456 # 55 # 13567891234 #, said the first five phone numbers.
If you need to set the alarm center phone number plus user ID number, do:
Send a short message 123456 # 71 # 88886666 # 0001 #, said the alarm center phone number is 88886666,
The user ID number is 0001. Alarm center telephone (0-15 bits); user ID number (4 digits)
When the alarm is issued, the user ID (dual tone) will be issued. This method is to display the user information with the cell center host.
   Delete the host has stored the phone number can send a short message: 123456 # 51 ##, said the deletion of the first phone number. And so on.
   Inquiry host has stored telephone number can send text messages: 123456 # 50 ##. Query the host has stored the alarm center phone number can send a short message: 123456 # 70 ##.
2, the host has solidified the contents of six text messages, the first 1-2 of the corresponding cable trigger port I1, I2, Article 3 corresponding to the wired trigger port I3 (the end of the host), Article 4 corresponding to the scene to move the image triggered the alarm, Corresponding to the wireless (infrared, Menci, remote control, etc.) to trigger the alarm, the first six corresponding emergency assistance:
When port I1 alarm: port 1 alarm.
When port I2 is alarmed: Port 2 alarm.
When port I3 is alarmed: Port 3 alarm (this pin is pinned at the end of the host).
Image movement alarm: Image alarm.
Wireless detector alarm: wireless alarm.
Emergency help: emergency.
The user can send a text message to replace the SMS content:
Such as send a short message 123456 # 81 # front door was opened #, instead of port 1 alarm.
Such as a short message 123456 # 82 # in the door was opened #, instead of port 2 alarm.
Such as a short message 123456 # 84 # Note that there are live pictures #, instead of image alarm.
Such as a short message 123456 # 85 # living room was in the #, instead of wireless alarm.
There is no need to change the information that has been cured during emergency assistance.
    Query host has stored SMS content: 123456 # 80 ##.
    Note: User self-made SMS content does not exceed 10 Chinese characters or English letters. If the host is reset, the contents of the SMS will be restored to the contents of the six messages.
Fifth, how to test the host's alarm function
After the host is disarmed, the user can use the remote control (armed key) or send text messages (123456 # 1 # 1 #) to arm.
(I1, I2 any side of the ground to touch), or wireless detector to trigger the alarm (wireless infrared, wireless door, remote control emergency button and other actions), if the alarm, , Or in the field at the camera to move the trigger alarm, will make the host camera, video and send an alarm message.
1, the host to open SMS / MMS alarm function, according to the trigger port (wired I1, wired I2, wireless detectors, image motion detection) to send the corresponding text messages / MMS content, send text messages / MMS and then call the alarm. If the host off SMS / MMS alarm function, then direct dial telephone alarm. In the alarm, you can press the remote control disarm key, exit the alarm state.
2, the alarm, the user can be connected to the phone can be monitored, but also remote control, no need to enter the password, you can directly press 3 # # # so that the host immediately issued a live alarm, press 3 # 0 # off the scene alarm. Press 4 # 1 # to switch to monitor.
3, the alarm, the host will be set according to the camera and the picture into the SD card.
4, usually, the owner can remote control by phone, enter the password before further operation.
 
Six, how to set the host through the short message remote control function
You can send a text message to the host settings, SMS format such as: password # opcode #.
Such as send a short message: 123456 # 1 # 1 #, said the host immediately armed.
Such as a short message: 123456 # 25 # 1930 #, said the host every day at 7:30 pm regular deployment.
Such as send a short message: 123456 # 26 # 0800 #, said the host every morning 8:00 disarmed.
Such as send a short message: 123456 # 22 # 0 #, said set the image size (small): 160x128.
Such as send a short message: 123456 # 31 # 888000 # change the password to 888000
Such as send a short message: 123456#61#269999@163.com# (set the first email address)
Such as send a short message: 123456 # 71 # 88886666 # 0001 # (set the alarm center phone number plus user ID number)
Such as send a short message: 123456 # 72 # 125.077.224.103 # 0900 #, said the host sent the picture to the INTERNET network alarm center, IP address is 125.077.224.103, port number 0900 users according to the local IP address and port number To set this.
When the host receives the short message, the implementation of the required settings will return a confirmation message, the user receives the short message to know the host is now working status.
The confirmation message format returned by the host (return information according to the different settings):
Disarmed; alarm sound: open; SMS: open; MMS: open; phone: off;
Image: Medium; Alarm picture: 1; Infrared light: Off; Motion detection: On
 
operating
Function Description
operating
Function Description
1 # 1 #
Immediately arm
1 # 0 #
Immediately disarmed (default)
2#--#
Immediately request to send the scene picture (1-20) Zhang, 2 # 1 # said 1 picture
3 # 1 #
Immediately open the scene alarm sound, immediately ring
3 # 0 #
Immediately turn off the live alarm
4 # 1 #
Immediately open the scene to listen
4 # 0 #
Immediately shut down the site monitor
11 # 1 #
Set alarm sound on (default)
11 # 0 #
Set the alarm sound off
12 # 1 #
Send SMS when setting up alarm (default)
12 # 0 #
Set the alarm without sending a text message
13 # 1 #
Set an alarm when sending a multimedia message (default)
13 # 0 #
Set the alarm without sending a multimedia message
15 # 1 #
Set the alarm when making a call (default)
15 # 0 #
Do not make a call when setting up an alarm
twenty one#--#
Set the image size of the camera (0-2) (default 1), 0 - small; 1 medium; 2 large
twenty two#--#
Set the number of automatic transmission of the scene pictures (0-20), (default 1)
23 # 1 #
Set the infrared light to turn on
23 # 0 #
Set the infrared light off (default)
24 # 1 #
Set the camera motion detection on (default)
24 # 0 #
Set the camera motion detection off
25 # - #
Set Timing Arming Time
25 # 0 #
Turn off arming time
26 # - #
Set the time to disarm the time
26 # 0 #
Turn off disarm time
27 # - #
Set the camera motion detection sensitivity (1-99) (1 most sensitive, default 15)
31 # - #
Set the new password (default 123456), 1-6 password
50 ##
The query already stores the phone number
51 # - #
Set the user number Group 1 (0-15 bits)
52 # - #
Set the user number Group 2 (0-15 bits)
53 # - #
Set the user number Group 3 (bits 0-15)
54 # - #
Set the user number Group 4 (bits 0-15)
55 # - #
Set the user number Group 5 (0-15 bits)
60 ##
The query already stores the email address
61 # - #
Set the first email address (0-31)
62 # - #
Set the second email address (0-31)
70 ##
Check the alarm center phone number that has been stored
71 # - #
Set the alarm center phone and user number, 71 # alarm center number # user number #
72 # - #
Set the IP address of the remote network: 72 # IP address # Port #
73 ##
Query MMS center settings (74 # -79 # content)
74 # - #
Set the MMS center user name (User name) ------------------------------ domestic use do not have to set
75 # - #
Set the MMS center user password (Password) ---------------------------- domestic use do not have to set
76 # - #
Set the MMS center GPRS access point (GPRS Access point) --------- domestic use do not have to set up
77 # - #
Set the MMS center IP address (IP Address) ------------------------- domestic use do not have to set
78 # - #
Set the port number (MMS) of the MMS center IP address ------------------- Do not need to set up for domestic use
79 # - #
Set the MMS home page (HomePage) ---------------------------------- domestic use do not have to set
80 ##
The query already stores the message content
81 # - #
Set the port 1 SMS alarm content (1-10 words)
82 # - #
Set the port 2 SMS alarm content (1-10 words)
84 # - #
Set the image alarm SMS content (1-10 words)
85 # - #
Set the contents of the wireless alarm SMS (1-10 words)
90 ##
Query the current host port status
93 # 1 #
Control host port 4 (relay at both ends of the pull)
93 # 0 #
Control host port 4 (disconnect the relay at both ends)
94 # 1 #
Control host port 4 (relay at both ends of the pull)
94 # 0 #
Control host port 4 (disconnect the relay at both ends)

Note: If the machine used in the country, 74 # to 79 # the contents of the default, no longer set. If used abroad, according to different countries GSM operators to provide MMS MMS center content to set, or let foreign customers set their own.
 
Seven, how to set the host by telephony remote control function
The user into the host phone, enter the password 123456 #, after a drop into the remote alarm host function settings, the operation code as above table.
If you want to send a live picture immediately, press 2 # 1 # and hang up.
The above settings, if long drops, said the operation is successful, two drops that the operation is wrong, should be re-entered.
 
8, how to add a new detector on the host
If the alarm host to increase the wireless infrared detector, wireless Menci, wireless remote control, etc., can be in the normal working state of the host (green light or flashing), hold down the host after the reset button (RESET) for a second, Turn on the red light, and then launch the detector, if the host light flashes or an external speaker 'tick' sound, that the host has been confirmed. If you press and hold the reset button (RESET) for one second or 20 seconds, the main unit will automatically exit and go to normal operation.
 
9, how to cancel the lost detector on the host
When the wireless detector (such as remote control) is lost, you need to clear the detector from the host to ensure security. Method is: press and hold the reset button (RESET) and then plug in the power, 3 seconds later heard beep or orange light to red light, and then red light to orange light, the system back to the initial state, password 123456, host Clear all detectors. The original other wireless detectors, you must re-increase the operation of the above method into the host computer. SMS content restored to the original solidified 6 SMS.
 
10, how to use the wireless remote control to control the host
Wireless remote control has four keys: armed key, disarm key, emergency key, function keys.
When you press the arming key, the panel panel lights flashing green, then the wireless detector trigger or field image movement trigger (after the deployment of mobile detection delay of about 15 seconds) or cable port trigger will make the host alarm, pull out the phone And send SMS / MMS, then the host panel lights become red flashing.
When you press the disarm key, the host panel lights LED green light, then the wireless probe trigger or cable port trigger will not make the host alarm.
When you press the emergency button, regardless of whether the host is armed (LED flashing green), or disarm arming (LED green light), will make the host alarm, pull out the phone and send text messages / MMS, then the host panel lights Flashes red.

Emergency key
Function key
Deployment key
Disarm key
 
11, how to understand the lights on the host panel
1, LED indicator, on behalf of the host signal status, when the host to turn on the power, the orange light is always bright, GSM module boot. Orange light slow flash, began looking for GSM network and detect SIM card. Orange light flash, detection camera. 20 seconds after the green light is always on, the host self-test success, the host automatically into the disarmed state. If the green light slow flash, the host is disarmed. If the red light flashes, the host is in alarm state, red light slow flash, send text messages or MMS settings; red light flash, send MMS.
 
12, how to understand the host main technical parameters
1, waiting current: 20mA
2, the supply voltage: 9V-12V
3, the working temperature: -40 ℃ - +55 ℃
4, support GSM900 / 1800/1900 MHz tri-band work mode
5, support PHASE 2/2 + protocol (including data services)
6, the transmission power: (2W) / EGSM900, (1W) / GSM1800 GSM1800
7, receive code: ASK
8, receiving frequency: 315/433 MHz
9, remote control distance: 100 m (open)
10, the number of receiving detectors: 10
 
14, how to rule out a simple failure
1, power orange light has been slow flash, can check the SIM card is installed? Antenna is installed?
2, power orange has been flashing non-stop, you can check the camera is installed?
3, the alarm when the host turns red, there are alarm, but immediately turn green, you can check whether the host phone number?